|
Rugged Ridge™ eXtreme Heavy Duty (XHD) Bumper System |
 |
| | FRONT | REAR | TIRE CARRIER | JACK MOUNT | |
|
The most advanced, toughest, and most flexible Jeep bumper system ever created!
|
 |
|
No other bumper can give your Jeep® CJ, YJ, TJ, JK, or Wrangler this many looks. |
- Modular design provides dozens of different looks and styles. You can build the exact bumper of your choice!
- Want to mount up a quartet of lights? No problem!
- Want more clearance for rock crawling? No problem!
- Only the XHD bumper from Rugged Ridge can give you 44 bumpers in one! You won't find a more versatile bumper system. Go from hardcore to street savvy with just a few handtools.
- Custom designed each component maximizes the oversized look of the vehicle.
- All components are constructed of heavy duty textured black powder coat painted steel with a tough E-coat under-coating and also available in stainless steel.
- Matching front and rear bumpers are available for a complete look.
|
| XHD FRONT BUMPER SYSTEM |
|
The XHD Short Base Bumper comes in two designs: Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look.
|
Pictured: Part No. 11540.10
 |
| 1976-2006 |
CJ & Wrangler |
Short Base
Winch Mount
Textured Black D-Rings |
11540.40 |
$468.95 |
| 2007-2011 |
Wrangler |
Short Base
Winch Mount
Textured Black D-Rings |
11540.10 |
$464.95 |
Pictured: Part No. 11540.11
 |
| 2007-2011 |
Wrangler |
Short Base
Light Mount
Textured Black D-Rings |
11540.11 |
$442.95 |
Pictured: Part No. 11540.71
 |
| 2007-2011 |
Wrangler |
Short Base
Light Mount
Stainless D-Rings |
11540.71 |
$1,102.95 |
Pictured: Part No. 11540.48
 |
| 1976-2006 |
CJ & Wrangler |
2.5" Tube; Textured Black |
11540.48 |
$415.95 |
| 2007-2011 |
Wrangler |
2.5" Tube; Textured Black |
11540.18 |
$526.95 |
Pictured: Part No. 11540.13
 |
| 1976-2011 |
CJ & Wrangler |
Stinger Over-Rider; 2" Textured Black |
11540.13 |
$231.95 |
Pictured: Part No. 11540.14
 |
| 1976-2011 |
CJ & Wrangler |
Hoop Over-Rider; 60mm Textured Black |
11540.14 |
$ 61.95 |
Pictured: Part No. 11540.16
 |
| 1976-2011 |
CJ & Wrangler |
Hoop Over-Rider; 60mm Stainless |
11540.16 |
$130.95 |
Pictured: Part No. 11540.42
 |
| 1976-2006 |
CJ & Wrangler |
Standard Ends; Textured Black |
11540.42 |
$199.95 |
Pictured: Part No. 11540.12
 |
| 2007-2011 |
Wrangler |
Standard Ends; Textured Black |
11540.12 |
$179.95 |
Pictured: Part No. 11540.19
 |
| 2007-2011 |
Wrangler |
Standard Ends; Stainless |
11540.19 |
$417.95 |
| Storage Ends; Textured Black |
11540.22 |
$274.95 |
| Tube Ends; Textured Black |
11540.21 |
$170.95 |
| Tube Ends; Stainless |
11540.73 |
$322.95 |
Pictured: Part No. 11540.17
 |
| 1976-2011 |
CJ & Wrangler |
Polished Stainless D-Rings |
11540.17 |
$311.95 |
Pictured: Part No. 11540.15
 |
| For use w/ 11540.10 ONLY |
Mounting Plates for Warn® Power Plant Winch |
11540.15 |
$ 21.95 |
| XHD REAR BUMPER SYSTEM |
|
The Rugged Ridge XHD Rear Bumper System features easy installation and two reinforced heavy duty D-Ring attachment points. Special "inner mounting plate" provides an extremely secure mounting point - strong enough for offroad use! The two-piece design allows use with and without tire carrier options. Heavy duty powdercoated steel design looks great but is extremely tough. Mount on the optional Tire Carrier and you can hold up to a 35" tire.
|
| HEAVY DUTY TIRE CARRIER, MOUNT, & SPACER |
Tire Carrier Add-On for XHD Rear Bumper
 |
| 2007-2010 |
Wrangler |
XHD Tire Carrier; Textured Black |
11546.20 |
$762.95 |
Wrangler JK XHD Tire Carrier Mount 11546.22
 |
|
The XHD Tire Carrier Mount features a latch which uses a door handle mechanism for durability and a great matching appearance. The massive hinge supports up to a 35" tire and has a locking pin to keep the arm in place on the even steepest grade.
|
| 2007-2010 |
Wrangler |
XHD Tire Carrier; Textured Black |
11546.22 |
$513.95 |
Wrangler YJ & TJ XHD Tire Carrier Mount 11546.42
 |
| 1976-2006 |
CJ | Wrangler |
XHD Tire Carrier; Textured Black |
11546.42 |
$512.95 |
Pictured: Part No. 11585.01
 |
|
The Rugged Ridge Heavy Duty Tire Carrier is constructed of 1/4" steel plate and mounts directly to the tailgate. The tire is relocated 2" up and out from the old mount for larger tire clearance. (Maximum tire size = 35")
|
| 1987-2006 |
Wrangler |
Heavy Duty Tire Carrier Mount; Textured Black |
11585.01 |
$46.95 |
Pictured: Part No. 11585.02
 |
| 1976-2011 |
CJ & Wrangler |
Tire Carrier Spacer; Textured Black |
11585.02 |
$59.95 |
| OFF-ROAD JACK MOUNT |
|
The JK Off-Road Jack Mount is compatible with stock and most aftermarket rear bumpers (w/o tire carrier) as well as the Rugged Ridge XHD rear bumper (w/ or w/o tire carrier). Fits most off-road jacks, including the Hi-Lift Jack. Fast and easy bolt on installation!
|
Pictured: Part No. 11586.01
 |
| 2007-2011 |
Wrangler |
Off-Road Jack Mounting Bracket; Textured Black |
11586.01 |
$87.95 |
|
|
