|
|
 The ruggedness and
highly versatile use for situations requiring lifting, pushing, pulling, winching, hoisting, and clamping have made the Hi-Lift Jack one of the most
popular tools off-roaders can't live without.
 The HI-LIFT can be scooted under a bumper that is
almost touching the ground and with a lifting capacity of 2-1/3 tons the steel casting 48" jack will raise the end of a vehicle to give enough
room to remove high centers, fill voids, dig out sand or muck, put on tire chains or change a flat. You can even use the jack to maneuver your rig
out of a ditch by placing it in a horizontal position against the bank and pushing sideways. Every jack comes with a top adjustable clamp clevic for
clamping and winching for use as a hand winch when used with a chain or tow strap. (chain & tow strap are not included) As an added safety
feature, the shear pin breaks when over loaded, climbing pins offer safe, positive contact. Lifting nose is 4" long for positive contact with
the load/surface.
|
 |
60" HI-LIFT JACK |
| PART # |
DESCRIPTION |
PRICE |
| HL604 |
black - 4 stamped steel parts |
$94.95 |
| HL605 |
red - all casting |
$92.95 |
| 48" HI-LIFT JACK |
| HL484 |
black - 4 stamped steel parts |
$89.95 |
| HL485 |
red - all casting |
$97.95 |
| Every Hi-Lift Jack is placed under load and tested for malfunction before it is packaged. |
HI-LIFT 4XRAC MOUNTING KIT - PART NO. 4X400
Our Price: $44.95 |
|
 The 4xRAC is designed for serious
off-roaders looking for an easy, inexpensive way to stow their Hi-Lift jack in a convenient, secure location. The brackets may be mounted on any flat
surface at least 2-1/2" wide. Kit contains 2 mounting brackets with caps, a Velcro strap for securing the Hi-Lift's handle, and all
necessary mounting hardware.
|
LOC RAC MOUNTING & LOCKING DEVICE - PART NO. LR200
Our Price: $33.95 |
|
The Loc Rac is a convenient mounting and locking device for storage of your Hi-Lift Jack. Installation is simple. It can be mounted horizontally or vertically, with or without a
jack protector. Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft. It also places the jack in an easy to reach, out of the way, location.
Loc-Rac is manufactured of high quality steel and a Lock is included.
|
BUMPER LIFT ATTACHMENT - PART NO. BL250
Our Price: $33.95 |
|
The Bumper Lift is designed to fit slotted or curved bumpers for quick and easy lifting. When used with the Hi-Lift jack, the Bumper Lift makes raising one wheel of
most average-sized vehicles an easy task. Bumper Lift has a 3,000-lb. capacity.
This Jack should not be used on curved or tubular vehicle bumpers as the vehicle could slip off the Jack and fall causing serious injury or death.
Use the Bumper Lift to lift most vehicles with curved or slotted bumpers. Do not raise inflated tire more than 2" (5 cm) above the ground. Never
attempt to lift more than one wheel at a time.
|
HI-LIFT JACK COVER - PART NO. JP350
Our Price: $41.95 |
|
The Jack Cover stores and protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as
mildew and decay resistant. Drawstring closure
|
HI-LIFT LIFT MATE - PART NO. LM100
Our Price: $45.95 |
|
The HI LIFT LIFT MATE has a lift capacity of 5000 lbs. (2273 kg) and rubber-coated hooks to protect the wheel
|
OFF ROAD JACK ACCESSORY KIT - PART NO. ORK
Our Price: $91.95 |
HI-LIFT OFF ROAD JACK BASE - PART NO. ORB
Our Price: $52.95 |
WRANGLER